Deuterium Lamp for Perkin Elmer LAMBDA Series : Scieno-Chem

Long Life Deuterium Lamp (2000 hour)

Brand : Scieno Chem

SC Part Number : PE-404

Made in USA

OEM : Perkin Elmer

OEM Reference Number : B0160917

Compatible Model(s) :

575, LAMBDA 10, LAMBDA 11, LAMBDA 12, LAMBDA 14, LAMBDA 15, LAMBDA 16, LAMBDA 17, LAMBDA 18, LAMBDA 2, LAMBDA 25, LAMBDA 35, LAMBDA 45, LAMBDA 650, LAMBDA 750, LAMBDA 850, LAMBDA 950, LAMBDA BIO 19, LAMBDA BIO 20, LAMBDA BIO 40, LAMBDA BIO 800, LAMBDA BIO 900, LAMBDA Series, LC-480 PDA, M55, M550, M551, M552, M552A, M553, M559A

Uses of Deuterium Lamps :

We supply Deuterium Lamps for HPLC and UV-Vis Spectrometers purpose. Apart from that Deuterium Lamps can be used ideally in pharmaceutical companies for testing purpose for:

• Atomic absorption spectroscopy (AAS)
• Thin film measurement
• Thin layer chromatography (TLC)
• Laboratory light sources

A deuterium lamp uses a tungsten filament and anode placed on opposite sides of a nickel box structure designed to produce the best output spectrum. Unlike an incandescent bulb, the filament is not the source of light in deuterium lamps. Instead an arc is created from the filament to the anode, a similar process to arc lamps. Because the filament must be very hot before it can operate, it is heated for approximately 20 seconds before use. Because the discharge process produces its own heat, the heater is turned down after discharge begins. Although firing voltages are 300 to 500 volts, once the arc is created voltages drop to around 100 to 200 volts. ^[1]